MSS630 Loudspeaker System


For exceptionally low distortion and outstandingly smooth frequency response, discriminating car audio listeners need look no further than McIntosh's MSS630 Car Loudspeaker System.

The MSS630 brings together a powerful combination of cutting-edge components, including a pair of MS20 Dome Tweeters and dual 6-1/2" Woofer Midrange Drivers, accompanied by the MN630 Crossover Network.

Each Component has been designed with minimal mounting requirements to bring McIntosh Car Audio standards to any automobile.

MSS630 Loudspeaker System
•Exceptionally Low Distortion
•Very Smooth Frequency Response
•Die-Cast Aluminum Baskets
•Tinsel Voice Coil Leads
•Neodymium Magnet Structures
•High Temperature ABS Enclosure
•Minimal Mounting Dimensions

Peak Power
120 Watts

Continuous Power (EIA + H.P.)
60 Watts

Frequency Response
80 Hz - 20kHz

System Sensitivity:
85 dB

Nominal Impedance (Znom)
4 Ohms

Crossover Frequency
2500 Hz

Low Pass Slope
12 db/oct

High Pass Slope
12 db/oct

WOOFER/MIDRANGE MOUNTING DIMENSIONS

Grille Overall (Diameter)
7-5/8” (194mm)

Speaker + Grille Overall Depth
3-15/16” (100mm)

Speaker Mounting Depth
3”(76mm)

Mounting Hole Diameter
5-7/8”(149mm)

MS20TWEETER MOUNTING DIMENSIONS

Housing Overall (Diameter)
2-1/8” (54mm)

Speaker + Grille Overall Depth
7/8” (22.2mm)

Speaker Mounting Depth
9/16”(14.2mm)

Mounting Hole Diameter
1-3/4”(44.5mm)

MN630 CROSSOVER MOUNTING DIMENSIONS

Width
2.7” (6.86mm)

Height
5.2” (13.20mm)

Depth
1.4”(3.4mm)

MSS630 SYESTEM WEIGHT

In Shipping Carton (pair) 9.5 lbs.(4.3kg)