The McIntosh HT-3 Loudspeaker System is designed for Home Theater and Music Reproduction. It is a two-way system with two 5-inch low frequency and two 1-inch dome tweeters. The HT-3 is designed to work as Surround Loudspeaker in a Home Theater System.

The HT-3 Loudspeaker performance is equivalent to the quality of McIntosh’s legendary line of Amplifiers, Preamplifiers, Signal Processors and Signal Sources, without imparting distortion or coloration of its own. It also complements the capabilities and the remarkably low distortion
of McIntosh Power Amplifiers.

To reproduce sound accurately, all forms of distortion, both harmonic and intermodulation, must be kept to a minimum. This has been the result of the design of the new McIntosh HT-3 Loudspeaker System. Each loudspeaker element and crossover component has been carefully designed for durability, efficiency, and above all, low distortion. The McIntosh HT-3 Loudspeaker System will function as an excellent Home Theater Loudspeaker Surround Loudspeaker.

System Driver Complement
Two 5-inch Low Frequency Drivers
Two 1-inch Dome Tweeters

Impedance
4 ohms Nominal

Frequency Response
85Hz - 12kHz

Sensitivity
88dB (2.8V/1m)

Crossover Frequency
1,500Hz

Power Handling
200 Watts Maximum

Overall Dimensions
HT-3 Surface Mount with grille:
14-7/8 inches (37.78cm) Height, 14-7/8 inches (37.78cm)
Width, 5-15/16 inches (15.09cm) Depth
HT-3 Flush Mount with grille and trim frame:
15-7/16 inches (39.22cm) Height, 15-7/16 inches
(39.22cm) Width, 5-3/16 inches (14.75cm) Depth

Finish
Grilles and Trim Frame are painted white

Weight (each)
HT-3 Surface Mount:
17.6 pounds (7.98kg) net, 23 pounds (10.43kg) in
shipping carton

HT-3 Flush Mount:
19.5 pounds (8.85kg) net, 25 pounds (11.34kg) in
shipping carton