Five Tweeter Bessel Function Array
The XLS360 utilizes five tweeters connected to produce a Bessel Function Array. The individual tweeter amplitudes and phase relationships are adjusted so the array acts as a high frequency point source. One advantage of such an arrangement is a very smooth and even acoustic polar response. This allows the listener to move off axis without suffering a change in high frequency output. The use of multiple tweeters, combined with a mechanical heat sink, also provides greatly increased power handling at high frequencies.

Patented LD/HP Technology
The McIntosh Low Frequency and Midrange Loudspeaker Elements feature the patented LD/HP motor structure. This design, when compared to conventional Loudspeaker
Elements, reduces distortion significantly. It also increases power handling and efficiency.

Automatic Overload Protection
The XLS360 have built-in Loudspeaker Element Protection in the form of automatic resetting solid-state devices as a part of the crossover network.

High Efficiency
The Loudspeaker Elements used in the XLS360 Loudspeaker Systems have also been designed for high efficiency. As a result any McIntosh Power Amplifier, even our smallest, will provide satisfying room filling sound.

Special Crossover Network
The Crossover Networks used in the XLS360 Loudspeaker Systems are designed to ensure an even frequency response over the entire audible range. The Network utilizes First, Second and Third Order design for optimal response.

 

Driver Complement
Two 10 inch LD/HP Woofers
One 6-1/2 inch LD/HP Midrange
Five 1 inch Dome Tweeters (in a Bessel Function Array)

Impedance
8 ohms Nominal

Frequency Response
34Hz - 34kHz -6dB (Typical Room)
55Hz - 34kHz + 2dB (Anechoic Response)

Sensitivity
85dB (2.8V/1m)

Crossover Frequencies
1.5kHz
250Hz

Power Handling
600 Watts Maximum

Overall Dimensions (including Floor Standing Base)
51-3/8 inches (130.5cm) Height
17-3/4 inches (45.1cm) Width
13 inches (33.0cm) Depth

Enclosure Finish
The outside of the enclosure is finished with a textured
black powder coated finish; the front, top and bottom of the
enclosure is covered with a thermal vacuum formed durable
surface in a textured black finish. The base is also
covered with a thermal vacuum formed durable surface in a
textured black finish

Grille Finish
Black knit fabric with wood trim strips finished in
Champagne Gold

Optional Wood Trim Finishes
Natural Cherry, Red Cherry or Black Ash
(Check with your McIntosh Dealer for Additional Details)

Weight (each)
107 pounds (48.5kg) net